One of the most extraordinary technology success is the accurate sterilization processes developments.
The methods produced for this purpose, use high temperature dry stoves, pure or mixed with formaldehyde ethyl gas for middle-low temperature
(37/80°C) processes, saturated vapour autoclaves. This last method is the most copiously used one for its unquestionable practicality and
simplicity advantages by maintaining its results necessary accuracy and repeatability.
The employed high temperatures (121/134°C) and a well calculated exposure of the material to treat to these ones, are the fundamental rudiments
on which this sterilization process is based. Years of study and experiences on field, have well reinforced the adopted procedure and the
expected results are daily confirmed by the specific bacteriologic analyses opportunely made.
The sterilization process within the hospitals and nursing homes, mainly regards the surgical instruments, the complementary accessories and
the rooms strictly intended for operating groups.
So the importance of the sterilization process is strictly correlated to the need , first of all, to guarantee the patient, the mainly exposed
person, the safety from the infected material during the operating sessions or other invasive research. Moreover the rooms used as operating
theatres, must be regularly and constantly disinfected even after every operation; only in this way, we can avoid the impending danger of the
patients accidental infection- Still today this phenomenon concerns the most health structures with consequent increases of the confining to bed
and of the supplementary costs of the medical staff.
But we mustn't consider that the refuse material in hospital and clinical surroundings is less important. This material permits to preserve
active a considerable pathogen microbe charge ,that is absolutely dangerous not only for the employers, but also for the whole community.
Some specific norms regard those refuses treatment and provide for specific procedures to guarantee every operating level safety. Recently,
it's been authorized these special hospital refuses could be drained away, but they before have to be subjected to a sterilization in the
first category refuse tips, because they can be assimilated to the urban solid refuses. Sterilization treatment makes innocuous the refuse
material, so the potential dangerous innate in it are nullified. That is why that only if sterilization is really efficacious it's possible
to obtain the hoped result. In order to do it, different procedures have been tested, even by using ionizing radiations and micro-waves,
but, in the long run, the treatment with heat saturated steam autoclaves. This is the treatment that Global Steril Service offers.
Adiramef Group will carry out all the equipments and the plants in conformity with the technical norms in force and according to the organization
and management criteria , so as to obtain results quality and safety.
DPR n. 915 del 10/09/1985 - Refuses picking and draining away
L. n. 45 del 10/02/1989 - L. 2/97 Bindi’s
DM 25/05/1989 - HSR (hospital special refuses) to the USR (urban solid refuses) admissibility
L. n. 626/1994 - and following integrations
Dir. CEE 93/42/CEE - Medical devices
Dlg n. 46 del 24/02/1997
EN 554 - EN 285 - terilizing machines and sterilization cycles
UNI 10384 - Sterilization cycle
UNI 8677 - Sterilization cycle test
DIN 58946 - Sterilization room peculiar features
Select Page :
Select Page :